WhatStove?

Stovax Stockton 11 hb boiler stove

Overall Rating:

3 flames

based on 2 reviews    (View rating breakdown)
Stovax Stockton 11 hb boiler stove

The Stovax Stockton family of boiler HB models are stoves that are fitted with the larger size of boiler.

The other Stovax stoves are available with smaller clip in boilers suitable for providing domestic hot water or heating 1-2 radiators.

These boiler stoves should be installed into a vented central heating system.

Technical Data
  • Height: 682mm
  • Width: 723mm
  • Depth: 474mm
  • Flue Diameter: 150mm
  • Fuel: Multifuel
  • Nominal Heat Output: 18kW

Add your review of this stove

Review Ratings Breakdown

Build Quality 2 flames
Quality of finish 2 flames
Value for money 2 flames
Ease of use 4 flames
Ease of lighting 4.5 flames
Firebox size 4.5 flames
How well does the airwash work 4 flames
Controllability 4.5 flames
Handle operation 4 flames
How likely are you to buy it again? 1 flames
What is your overall satisfaction? 1 flames

Most Recent Review

  • Terrible!

    Sarah Richardson 9 months ago

    Bought this stove in 2020 installed by a proper installer, this stove is now obsolete and can''t get any spare parts for it at all - after only 4 years! The metal inside the stove where the
    grate sits has cracked and broken and the top baffle has cracked and broken and no spare parts available, Stovax do not want to know, I now have to purchase a new stove because I can''t get parts. I will never buy a stovax again. I only bought it because I thought they had a good name. The doors were a nightmare to get right so they didnt leak air in, could not keep the fire in more than 3 hours even with nuggets on.
    Overall rating:

    3 flames

Most Popular Review

  • Inside coating

    Paul Wallace 12 years ago

    Had a yeoman boiler stove before this it had to be changed as doors were faulty and nearly impossible to fuel. This is the replacement and a lot better but there is a thick black coating on
    the 3 sides plus the top of the stove like melted rubber and can't get it off , there is a crust inside ,this coating has been there from day 1 so not a fuel issue, same wood as last stove an it didn't have the problem also use smokeless coal, the baffle plate and grate are spotless so can't work it out ,the riddling socket has just also fallen off ! ,the dealer I bought it off of has been very helpfull and have referred it to stovax but nothing yet 2 months approx , think I will just pull it out and cut my losses

    Stove expert replied: Make sure that you do periods of fast burn at least twice a day to reduce any tar residues that build up during slumbering periods, normally easier to do when hot water has been drawn off. At least 15mins twice a day should help to reduce the build up.

    Overall rating:

    3 flames