Review of Firebelly FB1 stove
no output
had the double sided fb1 for a month or so now it looks good lights fairly easy but gives off no heat.I was advised by the salesman that any bigger than this would be way to hot and "wouldnt be able to sit in same room as" what a load of rubbish.We have one room 12m/2 floor space and the other 20m/2 with low ceilings, i reckon we could have got a much larger stove. i am sat in front of it at the moment while typing this with my face about a foot away from it with flames blazing. \n\n
Stove expert replied: the fb1 should give out about the right output for those rooms (if reasonably well insulated). One or two things is probably going on; the draw may be very strong which will reduce the output. This would be noticable from a sucking noise at the air vents and the stove would be easy to light but hard to control. It may also be that the rooms are very cold and badly insulated in which case the stove is too small and the classic symptom is that the 'stove does not give out any heat' when in fact it does but the heat is being sucked up into the rooms. I think possibly critism should be levelled at the salesman, not the stove?
- Be the first to comment
- 267 You and 426 others