Earlswood stove

4 flames

The ACR Earlswood is a 5kw stove with a plain uncluttered design.

• Height: 536mm
• Width: 480mm
• Depth: 356mm
• Flue Diameter: 125mm
• Fuel: Multifuel
• Nominal Heat Output: 5kW
• Efficiency: 78%

More reviews for Earlswood stove (page 1 of 2)

• Earlswood Stove

  Andy Roughley 11 years ago

  Brilliant little stove. Purchased Jan '15 the heat output is brilliant and the glass stays nice and clear. I'm in a smoke controlled area and this doesn't cause a problem. Nice dry logs seasoned
  in my newly built log store and sometimes smokeless coal. I clear the ash pan before lighting every time and even if it's been burning a good 6 hours it's not full. I can't fault it
  ...[ read more ]
  Overall rating:

  4.5 flames

  • Be the first to comment
  • 309 You and 459 others

• ACR Earlswood

  David W 11 years ago

  Had stove for 2 months. A great little burner, but you really must have wood that's dry
  Overall rating:

  5 flames

  • Be the first to comment
  • 326 You and 422 others

• Insufficient heat output

  Karri Sharp 11 years ago

  We had this stove and chimney liner installed 4 weeks ago and burn smokeless coal. The heat output is poor and all the heat just seems to be going up the chimney. When we open the door the fire
  is really hot but when we close the door we feel little heat. The filler that seals the flue to the plate is cracking and falling off onto the top of the stove. We would not recommend.
  ...[ read more ]
  Overall rating:

  2.5 flames

  • Be the first to comment
  • 482 You and 365 others

• Odd mark in glass

  David Cox 11 years ago

  Great stove but only used for the first time yesterday and the glass has a strange mark inside it which doesn't fog up or get affected by blackening of the glass. First fire was kindling only
  , gently increasing heat, also second fire. Then started to increase heat on third fire and lastly added one log. Mark in glass still there. Looks like a defect. Wood is 20% moisture content. Any ideas anyone?
  ...[ read more ]
  Overall rating:

  4.5 flames

  • Be the first to comment
  • 442 This is helpful 333 This is unhelpful

• ACR Earlswood

  Mike Heal 11 years ago

  Installed the above on recommendations of a plumber friend. It is perfect as a secondary heat source and makes our lounge toasty and warm. It is best with dry wood and will blacken the glass
  if the wood is even slightly damp. We find that a quick rub with a wet cloth and cream cleaner soon cures it and cleans up the glass. Ash pan capacity not big enough IMHO, needs more ashing out if wood has thick bark so I generally try chopping the bark off. 9/10 for me [apart from chopping logs/ashing out/drying logs/sawing logs/stacking logs and all that faffing about] otherwise most pleasing to sit in lounge and just chill [pun intended]
  ...[ read more ]
  Overall rating:

  4 flames

  • Be the first to comment
  • 527 You and 379 others

• Great little stove for the money

  Andre Wright 12 years ago

  This stove is very good value for money and burns great as a Hetas fitter I just know they will burn a treat every time I install one
  Overall rating:

  3.5 flames

  • Be the first to comment
  • 403 You and 518 others

• Generally Very Pleased

  Dave Goldthorpe 12 years ago

  Our first experience with a stove was Clearview in a rented property which had a brilliant airwash system and the glass stayed clean at all times. It was too big for our new house and we liked
  the look of the Earlswood more. It is great - neat with a good size strong ashpan. The major gripe and it has become a pain is the fact that the glass gets really badly stained. It seems as though the instructions are at odds with the advice here. You are saying closing the primary air vent will lead to staining. Memo to manufacturer CHANGE THE INSTRUCTIONS!!Really good heat output, stinks like heck when first used, but they all do.
  ...[ read more ]

  Stove expert replied: The air wash control should be left open as this keeps the glass clean. If you are burning damp wood then the glass will blacken up. It can take a while to get used to a new stove and where the controls work best.

  Overall rating:

  3.5 flames

  • Be the first to comment
  • 547 You and 395 others

• Perfect easy to use stove

  Steve Barns 12 years ago

  After 2yrs of do we don't we, we bought the Earlswood, and don't regret it at all.It produces great amount of heat and looks good as well. we paid the extra over the cheaper ranges of stoves
  to get a better more efficient stove, up to now we have no regrets. Yes the glass smokes up with logs when you close it down but it soon clears once up to temperature. A flue thermometer helped at first to learn how to control and when to dampen down the fire.Buy one , you won't regret it.
  ...[ read more ]
  Overall rating:

  4 flames

  • Be the first to comment
  • 350 You and 498 others

• Nice looking stove

  S Field 13 years ago

  Have just installed the ACR earlswood stove and it looks lovely. However the glass gets very dirty, and the fire is either burning fiercely if air vents open, or with primary closed and top
  vent 50% closed the fire almost goes out. Our wood has been dried for nearly 3 years, so can't be that, so what are we doing wrong?Also can anyone tell us what the rotating part of the grate is for?
  ...[ read more ]

  Stove expert replied: This will de-ash the stove so that the ash falls into the ashpan. Leave the top lever open fully to keep the glass clean and use the bottom lever to alter the rate of burn.

  Overall rating:

  3.5 flames

  • Be the first to comment
  • 547 This is helpful 403 This is unhelpful

1. 1
2. 2
3. Next