Aarrow stoves Aarrow Ecoburn 5 inset stove
 

Aarrow Ecoburn 5 inset stove Hot

Aarrow Ecoburn 5 inset stove

Attributes

Flue diameter
125mm
Heat output
1-5kw
Fuel type
Cleanburning
Airwash
Yes
Efficiency
80.10%
OK for smokeless zone
No
Backboiler available
Appearance
Traditional but minimal
Coloured finish
black only
Made of
12mm Hearth OK?
No
Height
590mm
Width
572mm
Depth
555mm

The Aarrow inset Ecoburn 5 is available in a wood and multi fuel model.

The wood burning model will not have an ash pan and tray.

The flue outlet is a letterbox opening at around 30* and you will need to use an inset gather to connect to top exit flue.

Please be aware brochure error on kw output.


*Rating scoring - 0 is the lowest score / 5 is the maximum
Please view our guide to writing an honest review

User reviews

Average user rating from: 1 user(s)

Overall rating 
 
3.9
Build quality 
 
5.0  (1)
Quality of the finish 
 
5.0  (1)
Value for money 
 
4.0  (1)
Ease of use 
 
4.0  (1)
Ease of lighting 
 
5.0  (1)
Burning overnight 
 
1.0  (1)
Firebox size 
 
4.0  (1)
Does the airwash work 
 
4.0  (1)
Controlability 
 
3.0  (1)
Handle operation 
 
4.0  (1)
Would you buy this again 
 
4.0  (1)
Overall satisfaction 
 
4.0  (1)
Ratings (the higher the better)
Build quality*
Quality of the finish*
Value for money*
Ease of use*
Ease of lighting*
Burning overnight*
Firebox size*
Does the airwash work*
Controlability*
Handle operation*
Would you buy this again*
Overall satisfaction*
Reviewer info
Comments*
    Please enter the security code.
 
 
Aarrow Ecoburn 5 inset stove 2011-11-20 20:24:01 Trevor Bond
Overall rating 
 
3.9
Build quality 
 
5.0
Quality of the finish 
 
5.0
Value for money 
 
4.0
Ease of use 
 
4.0
Ease of lighting 
 
5.0
Burning overnight 
 
1.0
Firebox size 
 
4.0
Does the airwash work 
 
4.0
Controlability 
 
3.0
Handle operation 
 
4.0
Would you buy this again 
 
4.0
Overall satisfaction 
 
4.0
Reviewed by Trevor Bond    November 20, 2011

Aarow 5 Inset

Brilliant stove for taking up a small space in the room and looking smart, lighting easily and producing a good heat. Installation is a tricky job as no connection is provided between the gather (that sits on top of the stove with a 5" outlet), and the liner connection - I had to have a part made up at the local forge. Also it is incredibly tight to fit the stove under the lintel and still have enough of a face over the stove to seal to. Once in place though it certainly does the job. Not as hot immediately as a free standing stove but once the chimney gets up to temperature it has plenty of heat capacity. Never managed to keep it in over night yet.

Was this review helpful to you? 
70